Warning: Creating default object from empty value in /var/www/vhosts/st4makers.com/httpdocs/wp-content/themes/enfold/config-templatebuilder/avia-shortcodes/slideshow_layerslider/slideshow_layerslider.php on line 28
Remote Arduino OPC - st4makers.com

Remote Arduino OPC

You are here: Home / Forums / OPC Server for Arduino / Installation related issues / Remote Arduino OPC
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 03/06/2017 at 10:16 pm #46857
    Vural
    Member

    Hello,

    i have a project where i have to use a KepserverEx Client to communicate to the Arduino OPC. I successfully installed the aruduino Opc and can see it
    under my localhost via Matrikon Opc Explorer. However i can not see it on another laptop in the same network with Matrikon Opc Explorer. I have activated
    the registry function in Matrikon on both Pcs.

    I will first try to detect the arduino opc server from another laptop before i even try to connect via kepserver

    Does somebody has some tips for me how to see the server from another laptop ?
    Kind Regards
    Vural

    15/06/2017 at 3:43 pm #47554
    Juan Diego
    Member

    Hi Vural,

    Try this https://www.kepware.com/en-us/support/resource-library/connectivity-guides/remote-opc-da-dcom/

    You have to configure DCOM to access remotely to the server, but is extremely difficult get this configurations working… My advice, try to keep server and client on the same computer and you can connect your final clientes directly to the KepServer via OPC-UA

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.